Edimax Technology EW-7722UTn - Manual (Page 36)

31
3.7 Wi-Fi Protect Setup (WPS)
Wi-Fi Protected Setup (WPS) is the latest wireless network technology which makes
wireless network setup become very simple. If you have WPS-enabled wireless
access point, and you want to establish a secure connection to it, you don
‟t have to
configure the wireless access point and setup data encryption by yourself. All you
have to do is to go to the WPS setup page of this wireless card, click the PBC or PIN
button, and then press a WPS button or enter a set of 8-digit code on the wireless
access point you wish to establish a secure connection.
I.
Pin Input Config (PIN)
1. The PIN code of your wireless network card is an eight-digit number located
at the upper-right position of configuration utility. Remember it, and input
the number to your wireless access point as the WPS PIN code (Please
refer to the user manual of your wireless access point for instructions about
how to do this)
2. Click
„Pin Input Config (PIN)‟ button now, and the following message will
appear on your computer, click
„Yes‟ to select a specific wireless access
point or click
„No‟ to start PIN method of WPS .