Edimax Technology IC-7100W - Manual (Page 27)

26
4. This message will tell you if your network camera is connected to Internet
(connected to the cloud), and the connection type (wired or wireless). When
you see this message, click „Next‟ to continue. If you don‟t want to change
network camera‟s name and password, you can click „X‟ on the upper-right
corner of window to close ediview finder utility
5. You can input these information to configure network camera. Camera
Name: Input network camera‟s name used to identify this network camera.
Password: Input new password
Confirm: Input new password again for confirmation
Click „OK‟ button to keep changes