Edimax Technology IC-7100W - Manual (Page 8)

7
1.3 Product Features
No pre-loaded software required - all you need is a browser like Internet
Explorer 6 (and above, with plugin installed).
With supplied video surveillance software, you can connect up to 16 video
cameras and view images captured by every camera at the same time.
Supports 3 video resolutions: M-JPEG and H.264 SXGA(1280 x 1024),
VGA (640 x 480), and QVGA (320 x 240); MPEG-4 XGA (1024 x 768),
VGA (640 x 480), and QVGA (320 x 240).
Anti-flicker function (eliminates flash caused by fluorescent lights, 50 /
60Hz selectable).
Video control functions, like brightness and zoom-in / zoom-out.
Audio function, suitable for applications like video conference or
environment monitor.
Pan & tilt control.
Wired and wireless network (IC-7100W only, 802.11b / 802.11g / 802.11n)
support
Wireless data encryption (WEP / WPA)
Supports DHCP and PPPoE protocol, you can also assign a fixed IP
address to the camera also.
Supports Dynamic DNS (used to allocate the network camera ‟s Internet
address, when the ISP you ‟re using does not assign you with a fixed
Internet address).
Supports UPnP, Windows XP (and above) will discover this network
camera in network neighbor automatically.
Send captured picture and video by Email or FTP when motion is
detected.
Configurable motion detection sensitivity (6 levels from most sensitive to
least sensitive).
Built-in real-time clock, date and time information will be recorded with
every captured picture / video clip (also supports auto time
synchronization via network time protocol).
Upgradeable firmware - enjoy new functions without buying a new
camera!
Supports up to 16 users, and you can set different password to different
user.
Usage and event logging.