9 what is wep, 10 what is fragment threshold – Edimax Technology EW-7303 APn V2 User Manual

Page 64

Advertising
background image

5.9 What is WEP?

An option of IEEE 802.11 function is that offers frame transmission privacy similar to a wired

network.

The Wired Equivalent Privacy generates secret shared encryption keys that both source and destination

stations can use to alert frame bits to avoid disclosure to eavesdroppers.

WEP relies on a secret key that is shared between a mobile station (e.g. a laptop with a wireless

Ethernet card) and an access point (i.e. a base station). The secret key is used to encrypt packets before

they are transmitted, and an integrity check is used to ensure that packets are not modified in transit.

5.10 What is Fragment Threshold?

The proposed protocol uses the frame fragmentation mechanism defined in IEEE 802.11 to achieve

parallel transmissions. A large data frame is fragmented into several fragments each of size equal to

fragment threshold. By tuning the fragment threshold value, we can get varying fragment sizes. The

determination of an efficient fragment threshold is an important issue in this scheme. If the fragment

threshold is small, the overlap part of the master and parallel transmissions is large. This means the

spatial reuse ratio of parallel transmissions is high. In contrast, with a large fragment threshold, the

overlap is small and the spatial reuse ratio is low. However high fragment threshold leads to low

fragment overhead. Hence there is a trade-off between spatial re-use and fragment overhead.

Fragment threshold is the maximum packet size used for fragmentation. Packets larger than the size

programmed in this field will be fragmented.

If you find that your corrupted packets or asymmetric packet reception (all send packets, for example).

You may want to try lowering your fragmentation threshold. This will cause packets to be broken into

smaller fragments. These small fragments, if corrupted, can be resent faster than a larger fragment.

Fragmentation increases overhead, so you'll want to keep this value as close to the maximum value as

possible.

Advertising