Edimax Technology BR-6258n - Manual (Page 12)

11
3. You can power this router through either a computer or a wall socket. To power
the router through a computer, connect the USB cable to the micro‐USB port on
the front panel, and then connect the cable to a computer. Use the USB power
adapter to power the router through a wall socket.
4. Please check all the LEDs on the top panel. The “PWR” and “WAN” LEDs should be
on. The “LAN” LED should be on if the computer is connected and correctly
powered. If you encounter any problems, please make sure that all your devices
are connected and powered correctly.