Edimax Technology EW-7438RPn - Manual (Page 31)

29
The description of every setup item is listed as follow:
Item Description
Enable Wireless
Access Control
Check this box to enable MAC filtering. If you
didn’t check this box, anyone who knows the
wireless password can get connected to this
wireless repeater.
MAC Address Input the MAC address of the clients you wish to
deny or accept to access the repeater into the
MAC address list. Please input 12 HEX
characters here, and you don’t have to add :
(colon) or - (dash) characters every 2 characters.
If you don’t know how to get the MAC address of
a network client, see tips below.
Comment Input any descriptive text about this rule, so you
can remember the purpose of this rule. You can
input up to 20 alphanumerical characters in this
field.
Add Add this MAC address to the list.
Clear Clear ‘MAC Address’ and ‘Comment’ field.
Delete Selected Delete MAC address(es) you selected which
‘Select’ box is checked.
Delete All Delete all MAC addresses in the list. You’ll be
prompted to confirm deletion first.
Reset Uncheck all checked boxes.
Select All existing MAC addresses will be listed here.
To delete a MAC address from the list, check the
box of the MAC address you wish to delete first.
You can select more than one MAC addresses
here.
When you finish settings in this page, click ‘Apply’ button. You’ll see the
following message: