Using the cv-7438ndm, Iii-1, Ethernet – Edimax Technology CV-7438nDM User Manual
Page 14: Iii. using the cv-7438ndm
Advertising
![background image](/manuals/233645/14/background.png)
14
III. Using the CV-7438nDM
Once your CV-7438nDM has established a connection with your wireless
router/access point as described in
, you can connect the
wireless bridge to any Ethernet device or audio speakers for wireless
connectivity.
III-1. Ethernet
To “bridge” any Ethernet device to your Wi-Fi network, follow the instructions
below.
1.
Use an Ethernet cable to connect the Wi-Fi bridge to the Ethernet port on
your network device. You can use either of the Wi-Fi bridge’s Ethernet
ports (10/100 or 10/100/1000) depending on your requirements.
Advertising