Edimax Technology PS-1206MFG - Manual (Page 39)

31
the network. You can find the information of the MFP
Servers including “MFP Server Name”, “MAC ID”, “IP
Address” and the device that is connected to the MFP
Server.
MFP Server/MFP
Information When you are clicking on the “MFP Server” in the “MFP
Server List”, you will see the “MFP Server Description”
and the “Idle Timeout” setting for the MFP Server.
MFP Server Description – It is a description that can
help users to identify where or what the MFP Server is.
Idle Timeout – From here, each user can know his/her
auto release setting. To avoid occupying the MFP
overtime, each user can enable the “Auto Release”
setting at the bottom of the “MFP Manager” utility. It is
used to automatically disconnect the connection after the
MFP is idle for a specified period of time. By default, it is
never released.
When you are clicking on the “MFP” in the “MFP Server
List”, you will see the information including “Status”,
“Computer Name” and “Contact Information”.
Status – It displays the status of the MFP including
Connected, Idle and Busy. When the status is
“Connected”, it indicates that you are connecting the
MFP. When the status is “Idle”, it indicates that the MFP
is not being used. When the status is “Busy”, it indicates
that other user is using the MFP to scan, print, or etc.
Computer Name – It display the computer name of the
user who is connecting to the MFP.
Contact Information – When the current user has set
his “Contact Information”, you can see it here. You can
contact with the current user for asking to disconnect the
MFP.