Edimax Technology PS-1206MFG - Manual (Page 59)

51
MFP Server through Ethernet first and make sure your wireless LAN setting is
correct. After setting the wireless LAN, unplug the Ethernet cable and restart
the MFP Server, then you can start to use the MFP Server through wireless
LAN. If the wireless configuration does not work, please plug the Ethernet
cable again, restart the MFP Server and configure the MFP Server through
Ethernet until the wireless LAN settings are correct.
The default settings of the MFP Server wireless function are as follows.
Mode: Ad Hoc
SSID: Default
Channel: 11
Double Click “Wireless” icon and the wireless configuration window will
pop-up. If you use access point to build up wireless network, you have to
select “Infrastructure Mode”. If you do not have any access point and want to
use peer-to-peer connection to build up wireless network, you have to select
“Ad-Hoc Mode”.
For Wireless Function, you can select “Auto”, Enable” or “Disable” to manually
configure the wireless function.
Auto – “Auto” is the default setting of the MFP Server. At this mode, the MFP
Server will automatically decide to enable or disable the wireless function.