Edimax Technology MA-2000 - Manual (Page 46)

Chapter III Troubleshooting
Don’t panic if the Digital Network Media Adapter
most cases, you can solve the problem by yourself and you don’t h
the Digital Network Media Adapter
Please refer to this troubleshooting table to find out possible solution.
Scenario Solution
No picture is displayed.
When entering “Network
Media” menu, the
available networked NAS
and PCs list is not
displayed.
No USB device is
searched under “USB
Storage” menu
The BT multimedia files
can’t be downloaded.
46
Troubleshooting
ital Network Media Adapter is not function properly! In
most cases, you can solve the problem by yourself and you don’t h
Digital Network Media Adapter back to dealer of purchase to ask of help.
Please refer to this troubleshooting table to find out possible solution.
Solution
Check the power cord connection. Or connect the power
cord to another power outlet.
Are the Component Y/Pb/Pr/ AUDIO L/R cables or HDMI
Cable loose or disconnected? Make sure one of
connections is correct.
Try the “SOURCE” button on the remote control of the
external display/ TV, to select the correct input source.
Make sure Video Output selection in the setup menu,
such as CVBS/ S-VIDEO/ COMPONENT/ HDMI, is
correct. Press button on the remote controller for
Video Output selection until you see the picture on your
screen.
Check your wired/ wireless connection to make sure that
it’s working properly. Use an Ethernet LAN cable to
connect from the Network jack of the MA
network router or Access Point. Or check the setting
between your external USB wireless dongle and IP
sharing.
Check your Network Setting of the Setup menu.
Check the setting on the shared folder
networked NAS or PCs.
Check USB device is already firmly conne
Check the format of your USB drive: is it in NTFS/EXT
format?
For BitTorrent, users need to set up port forwarding on the
TCP range 6881-6890 of Access Point or IP sharing.
is not function properly! In
most cases, you can solve the problem by yourself and you don’t have to send
back to dealer of purchase to ask of help.
Please refer to this troubleshooting table to find out possible solution.
Check the power cord connection. Or connect the power
Component Y/Pb/Pr/ AUDIO L/R cables or HDMI
Cable loose or disconnected? Make sure one of
Try the “SOURCE” button on the remote control of the
external display/ TV, to select the correct input source.
on in the setup menu,
VIDEO/ COMPONENT/ HDMI, is
on the remote controller for
Video Output selection until you see the picture on your
Check your wired/ wireless connection to make sure that
it’s working properly. Use an Ethernet LAN cable to
connect from the Network jack of the MA-2000 to the
network router or Access Point. Or check the setting
rnal USB wireless dongle and IP
Check your Network Setting of the Setup menu.
/ file on your
Check USB device is already firmly connected.
Check the format of your USB drive: is it in NTFS/EXT-3
For BitTorrent, users need to set up port forwarding on the
6890 of Access Point or IP sharing.