Edimax Technology MA-2000 - Manual (Page 8)

8
1-2 Safety Instructions
This product has been engineered and manufactured to assure your personal
safety. However, any improper use can result in potential electric shock or fire
hazards. In order not to defeat the safe-guards incorporated in this instrument
and its accessories, please adhere to the following instructions when installing,
operating and servicing.
Power Source Warning
A marking label attached on the rear side of the adapter (supplied) indicates
the correct power source for this equipment. Operate this product only from an
electrical outlet with the voltage and frequency indicated on the product label.
Incorrect power source may result in a risk of electric shock or fire. If you are
uncertain of the type of power supplied to your home, consult your local power
company or appliance dealer.
Only use the power cord and adapter provided by the manufacturer. Internal
component may be damaged if you use a different adapter to power this
product. To avoid electric shock and fire hazard, match the plug and outlet
connections carefully, then fully insert. If the plug fails to fit the outlet, please
contact an electrician to update your power outlets.
Do not overload electrical outlets, extension cords, or integral convenience
receptacles as this can result in a risk of fire or electric shock. And to prevent
power cord damage, arrange all power cords so that people cannot walk on
the cords. Do not place objects on the cords.
Place this product in a location that is close enough to an electrical outlet and
where the power cord is easily accessible to be disconnected from the wall
outlet.
Usage Warning
To reduce the risk of electric shock, do not remove the cover or attempt to
disassemble this product. There are no user-serviceable parts inside. Please
refer all servicing to qualified service personnel.