Edimax Technology CV-7428nS - Manual (Page 6)

6
I-4. Rear Panel
a. Antenna
Fixed dipole antenna.
b. 10/100M LAN Ports
Connect computers or other network devices to these ports using an
Ethernet cable.
c. Power Port
Connect the included 5V DC power adapter here.
d. WPS/Reset Button
Press and hold this button for 2 seconds to activate the WPS function. Press
and hold this button for 10 seconds, until the PWR LED starts flashing, to
reset the wireless bridge to factory default settings.
I-5. Safety Information
In order to ensure the safe operation of the device and its users, please read
and act in accordance with the following safety instructions.
1. The wireless bridge is designed for indoor use only; do not place the
wireless bridge outdoors.
2. Do not place the wireless bridge in or near hot/humid places, such as a
(a) Antenna
(1 of 2)
(b) LAN Ports (c) Power Port (d) WPS/Reset
Button
(a) Antenna
(2 of 2)