Edimax Technology CV-7428nS - Manual (Page 8)

8
II. QUICK SETUP
Your wireless bridge can be up and running in a matter of minutes. There are
two ways you can quickly setup your wireless bridge - using the WPS button or
using iQ Setup on your computer.
II-1. WPS Button Setup
Note: If your root network access point/router does
not have a WPS button or if you encounter
difficulties establishing a WPS connection, please
refer to
II-2. iQ Setup as an alternative.
1. Plug the power adapter into the device’s 5V power port, and plug the
adapter into a wall socket. The PWR LED will light up as on when the device
is ready.
2. Press and hold the WPS button on the wireless bridge for 2 seconds to
activate the WPS function. The WLAN LED should flash slowly (two seconds
on, two seconds off) to indicate that WPS is in progress.
Press for two
seconds
WLAN LED should
flash slowly