Edimax Technology BR-6204WLg - Manual (Page 53)

52
Server Address Input the IP address of L2TP connection server.
User Name Input the user name of L2TP connection server.
Password Input the password of L2TP connection server.
MTU Size Please input the MTU value of your network
connection here (from 1400 to 1492). If you don’t
know which value you should use, you can use
default value.
Disconnect after Check this box and this router will disconnect
current L2TP connection after there’s no network
activity for the time specified here. Uncheck this
box to keep L2TP connection alive forever.
Obtain DNS
Automatically
Most of service provider will provide DNS IP
address via DHCP. Select this option and this
router will obtain DNS server’s IP address from
your service provider automatically.
Set DNS Manually /
DNS 1 - 3
Select this and input the DNS (Domain Name
System) server’s IP address assigned by your
Internet Service Provider. You can input up to 3 IP
addresses of DNS server, and do not input
hostname here. At least one DNS server is
required.
Clone MAC Address If your Internet Service Provider only permits
connection from specific MAC address, type the
MAC address here.
Enable uPNP Check this box if you wish to enable uPNP
(Universal Plug-and-Play) function on WAN port.
Enable Web Server
Access on WAN
If you wish to connect to the web configuration
interface from Internet, please check this box.
Please note that if you didn’t set a strong
password to protect this router, the settings of
this router may be modified by unauthorized
person who comes from Internet. Only check
this box when it’s required.
Next Save changes you made in this page.
Cancel Discard changes you made in this page.