Edimax Technology BR-6204WLg User Manual
Page 60
59
The descriptions of every setup item are listed below:
Item Name
Description
Authentication Type
Select the wireless authentication type: Open
system, Shared Key, or Auto. The wireless client
must use the same authentication type or they
won’t be able to connect to this router. If you don’t
know which one you should use, select ‘Auto’.
Fragment Threshold
Fragment threshold is used to control the size of
the maximum size of every network packet. When
radio reception is good and there’s no or very few
radio interference, it’s suggested to use a larger
value to improve the network performance; if
there’s a lot of radio interference or the radio
reception is bad, you can use a smaller value to
reduce the time wasted on packet re-transmission.
You can use default value (2346). If you found
there’re some communication problems, you
can try a smaller value and see if this will
improve network performance and stability.