Fein SCU7-9 - Manual (Page 15)

15 en
en Original Instructions for Dry Wall Screw Gun.
Symbols, abbreviations and terms used.
Symbol, character Explanation
Do not touch the rotating parts of the power tool.
Make sure to read the enclosed documents such as the Instruction Manual and the General
Safety Instructions.
Before commencing this working step, pull the mains plug out of the socket. Otherwise
there will be danger of injury if the power tool should start unintentionally.
Use eye protection during operation.
Observe the information in the adjacent text!
Confirms the conformity of the power tool with the directives of the European Commu-
nity.
This sign indicates a possible dangerous situation that could cause severe or fatal injury.
Worn out power tools and other electrotechnical and electrical products should be
sorted separately for environment-friendly recycling.
Product with double or reinforced insulation
Low speed
High speed
Reduce torque
Increase torque
WARNING
Character Unit of measure,
international Unit of measure,
national Explanation
P
1
W W Power input
P
2
W W Output
U V V Rated voltage
f Hz Hz Frequency
n
0
/min rpm No-load speed
n
1
/min rpm Speed, full load
M
1
Nm Nm Max. tightening torque for hard screwdriving
application
M
2
Nm Nm Max. tightening torque for hard screwdriving
application, rigid through-drive
inch inch Hexagon socket tool holder
mm mm Tool holder, external flat (DIN 3126-H7)
mm mm Screw diameter, steel
mm mm Screw diameter, wood
mm mm Dowel/anchor diameter
kg kg Weight according to EPTA-Procedure 01/2003
L
pA
dB dB Sound pressure level
L
wA
dB dB Sound power level
L
pCpeak
dB dB Peak sound pressure level
K... Uncertainty
Fe
OBJ_BUCH-0000000030-001.book Page 15 Tuesday, April 19, 2011 1:13 PM