En for your safety – Fein KBM65U User Manual
Page 26
26
en
For your safety.
Read all safety warnings and all
instructions. Failure to follow the
warnings and instructions may result in electric shock,
fire and/or serious injury.
Save all warnings and instructions for future reference.
Do not use this power tool before you have thor-
oughly read and completely understood this
Instruction Manual and the enclosed “General
Safety Instructions” (document number
3 41 30 054 06 1). The documents mentioned should be
kept for later use and enclosed with the power tool,
should it be passed on or sold.
Please also observe the relevant national industrial safety
regulations.
Intended use of the power tool:
Magnetic core drill unit for drilling with core drill bits and
solid drill bits, reaming, countersinking and tapping on
materials with surfaces suitable for magnets in weather-
protected environments using the application tools and
accessories recommended by FEIN.
This power tool is also suitable for use with AC genera-
tors with sufficient power output that correspond to the
Standard ISO 8528, design type G2. This Standard is par-
ticularly not complied with when the so-called distortion
factor exceeds 10 %. When in doubt, please refer to the
generator instruction/specification guide.
Switches the magnet On/Off
*
Value applies for KBM 50 auto in manual machine operation
Symbol, character
Explanation
Character
Unit of measurement,
international
Unit of measurement,
national
Explanation
P
1
W
W
Power input
P
2
W
W
Output
n
0R
/min, min
-1
, rpm,
r/min
rpm
No-load speed
(clockwise)
n
0L
/min, min
-1
, rpm,
r/min
rpm
No-load speed
(anticlockwise)
in
inch
inch
Size
U
V
V
Rated voltage
f
Hz
Hz
Frequency
M...
mm
mm
Size of metric thread
Ø
mm
mm
Diameter of a round part
mm
mm
Drilling capacity in steel - TCT (core drill bit)
mm
mm
Drilling capacity in steel - high speed steel
(HSS) (core drill bit)
mm
mm
Drilling capacity in steel - high speed steel
(HSS) (twist drill bit)
mm
mm
Max. drill chuck capacity
mm
mm
Reamer diameter
mm
mm
Counterboring diameter
kg
kg
Weight according to EPTA-Procedure 01/2003
L
pA
dB
dB
Sound pressure level
L
wA
dB
dB
Sound power level
L
pCpeak
dB
dB
Peak sound pressure level
K...
Uncertainty
m/s
2
m/s
2
Vibrational emission value according to
EN 60745 (vector sum of three directions)
h
m/s
2
m/s
2
Mean vibrational value for core drilling
m, s, kg, A, mm, V,
W, Hz, N, °C, dB,
min, m/s
2
m, s, kg, A, mm, V,
W, Hz, N, °C, dB,
min, m/s
2
Basic and derived units of measurement from
the international system of units SI.
Fe HM
Fe HSS
WARNING
OBJ_DOKU-0000003285-001.fm Page 26 Wednesday, April 17, 2013 9:07 AM