Apple LED Cinema Display - Manual (Page 9)

English 9
Setting Up Your Computer with the Lid Closed
You can close the lid of your computer and use just your Apple LED Cinema Display.
Follow the setup instructions on the previous page and make sure the MagSafe
connector from the display is plugged into the MagSafe power port on your computer.
To use your Apple LED Cinema Display with your computer’s display closed:
1 Connect an external USB keyboard and mouse to the USB port on your display or use
the Bluetooth® Setup Assistant to set up a wireless keyboard and mouse.
2 Make sure your computer is turned on.
3 Close the display on your computer to put it to sleep.
4 Wait a few seconds, and then press any key on the external keyboard or move the
mouse to wake your computer.