Hama ROC8505 - Manual (Page 10)

5. If the problem persists and always with the same
key, check that the original remote control is
actually operating: is it sending IR signals? (check
batteries; is it correctly aligned in relation to the
diode on your ROC 8505?
Note 2:
• You cannot copy keys to the LEARN , BACKLIGHT ,
SETUP , MACRO , FAV , HOME CINEMA keys.
• All the keys copied to a mode will be deleted if a 3
figure code is entered for this mode (and likewise for
direct entry of a code, search of a code or make).
Identifying the position of the diode on
the original remote control (keys to copy)
If the LED of the original remote control is not
visible (for example, if hidden behind a dark plas-
tic plate), the instructions below will help you to
locate it precisely.
1. Place the front of the original remote control
(the part you point at the device to control)
around 2.5 cm from the LED of your ROC
8505 opposite
LEARN (see LEARNING dia-
gram at beginning of instructions).
2. Hold down the SETUP key until the key cor-
responding to the last selected mode remains
lit.
3. Release the SETUP key.
4. Press once on a mode key ( TV , DVD , VCR , …).
The key goes out and then relights.
5. Press once on the LEARN key.
6. Hold down one of the keys on the original
remote control while moving the remote
control from left to right. As soon as the 2
remote controls are correctly aligned, the
mode key blinks rapidly.
7. To copy the key functions from your original
remote control into your ROC 8505, go to
step 5 of “To copy keys”.
Note: Some original remote controls don’t transmit conti-
nuous IR signals when a key is held down. If this is the
case, press several times on one of the keys while moving
the remote control from left to right.
To copy keys
1. Hold down the SETUP key until the key cor-
responding to the last selected mode remains
lit.
2. Release the SETUP key.
3. Press once on the mode key ( TV , DVD , VCR , …).
The key goes out then relights.
4. Press the LEARN key once.
5. Press once on the key of your ROC 8505 to
which you want to copy one of the keys of
your original remote control.
6. Hold down the key of the original remote
control you wish to copy until the mode key
goes out and then relights (2 to 3 seconds).
In case of problems, the mode key will blink
for 3 seconds but will remain in learning
mode.Try again or try another key.
7. For the other keys, repeat the procedure
from step 5 onwards.
Press the SETUP key once when all the desired
keys have been copied.The mode key goes out.
To delete all keys copied under a mode
1. Hold down the SETUP key until the key cor-
responding to the last selected mode remains
lit
2. Release the SETUP key.
3. Press once on a mode key ( TV , DVD , VCR , …).
The key goes out then relights.
4. Press twice on the LEARN . key. The key goes
out then relights.
5. Press once on the SETUP key. The mode key
goes out.All the keys copied under this mode
are deleted.
The
HOME CINEMA
key
The Home Cinema mode is a mode in which cer-
tain keys of the remote control are dedicated to
those devices that you select. This becomes pos-
sible after allocating a mode key (
TV , DVD , …) to
a group of keys previously dedicated to this
mode. For example, the play keys (8) can be allo-
cated to a video cassette recorder, a DVD player,
a cassette player, hifi system, etc. It is up to you to
choose which device you will allocate to this
group of keys. You need to do the same for the
other groups of keys.
The groups of keys are:
All the keys except the PROG , VOL and keys, as
well as the play keys (8) plus the navigation keys (5).
• the
PROG key
• the VOL and keys (4)
• play keys
• the navigation keys , MENU ,
EXIT , OK .
How to program the
HOME CINEMA
key?
1. Hold down the SETUP key until the key cor-
responding to the last selected mode remains
lit.
2. Release the SETUP key.
3. Press once on the HOME CINEMA key. The
mode key goes out then relights.
4. Select the device allocated to the number
keys (1 to 9).
Press once on a numbered key then once on a
mode key (
TV , DVD , VCR , …). The key goes out
then relights.
5. Select the device allocated to the PROG key
(channel changes).
Press once on the PROG key then once on a
mode key ( TV , DVD , VCR , …). The key goes out
then relights.
6. Select the device allocated to the VOL and
keys.
Press once on the VOL or (4) keys then once
on the mode key ( TV , DVD , VCR , …).The key goes
out then relights.
5
EN
ROC8505_en 13/07/05 17:04 Page 5