Hama ExpressCard USB 3.0 - Manual (Page 6)

6
g
Operating Instruction
Package contents
• USB 3.0 ExpressCard with 2 ports
• Driver CD-ROM
• These printed installation instructions
Important instructions regarding the power supply
Connecting an external power supply unit allows you to
provide connected USB devices with power. This means
that devices without their own power supply can also be
operated using the ExpressCard.
Please note:
Use only switching power supply units with the following
specifications (we recommend Hama item no. 46600):
• Voltage DC 5 V, capacity depends on the device that is
connected.
• Polarity: outer negative (-) and inner positive (+)
Caution: Failure to observe this warning may cause
damage to the laptop, ExpressCard or the connected
device. Hama GmbH & Co KG accepts no liability for
damage that arises from a failure to observe these
instructions.
Software installation
Installation on Windows Vista and Windows 7
You must install the driver from the accompanying
CD-ROM before you plug the ExpressCard into your
laptop.
To do so, place the enclosed driver CD into your laptop’s
drive. The Hama installation program starts automatically
after a few moments. If the program does not start, use
the right mouse button to double click autorun.exe in the
main directory of the driver CD.
Select the appropriate language.
Click on Install Driver.
If you want to read the operating instructions in electronic
form, click Display Instructions. Please note that you must
have Adobe Acrobat Reader installed on your computer
to display the instructions. If this program has not been
installed, click Acrobat Reader to install the software
from the CD. Click Download driver to check to see if new
drivers for the product are available. Click Back to return
to language selection.
After installation has started, User Account Control,
which is integrated in Windows Vista/Windows 7, may ask
you whether you want to install the driver. Click Continue,
or, on Windows 7, click Yes.
Click Next.