Hama ExpressCard USB 3.0 - Manual (Page 7)

7
Accept the terms and conditions of the license
agreement by selecting “I accept the terms of the
license agreement” and then click “Next” to continue.
Click Next.
Click Install.
Installation has been completed successfully.
Then click Finish.
Now plug the USB 3.0 ExpressCard carefully into the
laptop. Windows will automatically detect it and install
the associated driver.
You can verify whether the ExpressCard was installed
successfully by checking under Start (Windows Logo)
-> Control Panel -> System and Maintenance -> Device
Manager. In some circumstances, you may be asked by
Windows User Account Control to allow this action.
Click Continue. The following entries must appear without
a yellow exclamation mark.
Universal Serial Bus controllers
• Renesas Electronics USB 3.0 Host Controller
• Renesas Electronics USB Root Hub
Installation on Windows XP with Service Pack 3
Requirements:
Ensure that your user account has administration
privileges for Windows XP, otherwise the driver
installation will not be successful. In addition, Service
Pack 3 from Microsoft must also be installed on your
computer in order to install and operate the ExpressCard.
You must first install the driver from the accompanying
CD-ROM before you plug the ExpressCard into your
laptop.
To do so, place the enclosed driver CD into your laptop’s
drive. The Hama installation program starts automatically
after a few moments. If the program does not start, use
the right mouse button to double-lick autorun.exe in the
main directory of the driver CD.
Select the appropriate language.