ResMed S9 H5i - Manual (Page 10)

English
6
Notes:
• The manufacturer reserves the right to change these specifications without notice.
• The temperature and relative humidity settings displayed for ClimateLine or ClimateLine MAX are not
measured values.
• Check with your clinician/service provider before using the SlimLine air tubing with devices other
than the S9 or H5i.
Humidifier performance
The following settings have been tested at 22°C ambient temperature:
Cleanable water tub Injection molded plastic, stainless steel and silicone seal
Standard water tub Injection molded plastic, aluminium and thermoplastic
elastomer
Operating temperature +5ºC to +35ºC
Operating humidity 10–95% non-condensing
Storage and transport temperature -20ºC to +60ºC
Storage and transport humidity 10–95% non-condensing
ClimateLine air tubing Flexible plastic and electrical components, 2 m, 15 mm
inner diameter
ClimateLine MAX air tubing Flexible plastic and electrical components,1.9 m, 19 mm
inner diameter
Heated tubing temperature cut-out  41°C
IEC 60601-1 classification Class II (double insulation), Type BF
Electromagnetic compatibility Please refer to the S9 Information Guide for details
CPAP mask
pressure, cm H
2
O
RH output % Nominal system output AH a , BTPS b
a. AH - Absolute Humidity in mg/L.
b. BTPS - Body Temperature Pressure Saturated.
Setting 3 Setting 6 Setting 3 Setting 6
4 90 100 10 18
10 95 100 11.5 21
20 95 100 11 18
25 100 100 12 13.5