RIDGID micro IR-100 - Manual (Page 15)

micro IR-100 Non-Contact Infrared Thermometer
Ridge Tool Company
13
Service and Repair
WARNING
Improper service or repair can make the RIDGID micro IR-100
Non-Contact Infrared Thermometer unsafe to operate.
Service and repair of the micro IR-100 must be performed by a
RIDGID Independent Authorized Service Center.
For information on your nearest RIDGID Independent Service Cen-
ter or any service or repair questions:
• Contact your local RIDGID distributor.
• Visit www.RIDGID.com or www.RIDGID.eu to find your local
RIDGID contact point.
• Contact RIDGID Technical Services Department at rtctechser-
[email protected], or in the U.S. and Canada call (800) 519-
3456.
Disposal
Parts of the RIDGID micro IR-100 Non-Contact Infrared Thermo-
meter contain valuable materials and can be recycled. There are
companies that specialize in recycling that may be found locally.
Dispose of the components in compliance with all applicable regu-
lations. Contact your local waste management authority for more in-
formation.
For EC Countries: Do not dispose of electrical equipment
with household waste!
According to the European Guideline 2002/96/EC for
Waste Electrical and Electronic Equipment and its imple-
mentation into national legislation, electrical equipment
that is no longer usable must be collected separately and disposed
of in an environmentally correct manner.
Battery Disposal
For EC countries: Defective or used batteries must be recycled ac-
cording to the guideline 2006/66/EEC.