Sony SLV-KH7ME - Manual (Page 32)

Additional Operations 34
Enjoying the
surround sound
(Virtual Sound)
You can use the Virtual Sound
function to give stereo sources the
surround sound effect and monaural
sources a simulated stereo effect.
1
Select the type of sound source with the VIRTUAL SOUND switch.
Select SURROUND when listening to a stereo source; select
SIMULATED STEREO for a monaural source.
2
Press EFFECT so the WIDE or WARP indicator lights up.
Virtual sound
Type
SURROUND (stereo)
SIMULATED STEREO
(monaural)
To cancel the Virtual Sound
Press EFFECT repeatedly until both WIDE/WARP indicators turn off.
Notes
• This function is available only when the tape sound is reproduced on a stereo TV
(or other stereo audio equipment). If the connected TV or other audio equipment is
monaural or simulated stereo, you cannot get a clear effect.
• We recommend that you do not use the surround effect function of this unit and
that of the connected TV (or other audio equipment) at the same time. If you do so,
the function may not work properly because the effects overlap each other.
VIRTUAL SOUND switch
EFFECT button
WIDE/WARP indicators
Effect For
WIDE A sound effect that spreads out over a large area
WARP A sound effect that totally envelopes you in sound
WIDE A simulated stereo effect
WARP A wide ranging simulated stereo effect