Cut height lever for fine adjustment, Service voltage, Guarantee – ROWENTA PERFECT LINE HC1037 User Manual

Page 5: Maintenance, Lubrication, Changing the cutting head, Safety advice

Advertising
background image

With its careful design and precise adjustment of the cut height, this trimmer is a genuine pro-
fessional-quality tool of genuine professional quality.
Please read these instructions before using this appliance, to avoid any danger through incorrect use.

1. DESCRIPTION OF THE HAIR TRIMMER AND ITS
ACCESSORIES (Fig. 1)

A. Cut height fine adjustment lever.
B. On/off switch.
C. 6 Combs (3, 6, 9, 13, 18, 25 mm)
D. Cleaning brush.
E. Styling comb.
F. Scissors.

2. CUT HEIGHT LEVER FOR FINE ADJUSTMENT

Your hair trimmer is equipped with a cut height fine adjustment lever. Choose the position required by
rotating the lever (Fig. 4).

3. SERVICE VOLTAGE

Ensure that this voltage corresponds to that of your mains supply. Incorrect connection may cause irre-
parable damage which is not covered by the guarantee.

4. GUARANTEE

This appliance has been designed for a domestic use only. It can not be used in any professional aplli-
cation. The guarantee becomes null and void in case of incorrect use.

5. MAINTENANCE

We recommend that the cutting head be cleaned after each use, using the cleaning brush.

6. LUBRICATION

Auto-lubricating blades = no more lubricating needed !

7. CHANGING THE CUTTING HEAD

• After a long period of use, the cutting blade may become dull. The plate may lose a tooth if the
appliance is dropped.

DISASSEMBLY / REASSEMBLY (FIG. 3)
NB : spare parts are available from specialist outlets and from approved ROWENTA service centres.

8. SAFETY ADVICE

• For your safety, this appliance complies with the applicable standards and regulations (Low Voltage Directive,
Electromagnetic Compatibility, Environmental…).
• Check that the voltage of your electricity supply matches the voltage of your appliance. Any error when connecting
the appliance can cause irreparable harm, not covered by the guarantee.
• As an additional safety measure, we recommend the installation of a residual current difference device in the electrical
circuit supplying the bathroom,acting at not more than 30 mA.Ask your installer for advice.
• The installation of the appliance and its use must however comply with the standards in force in your country.
• CAUTION : Never use your appliance with wet hands or near water contained in bath tubs, sho-
wers, sinks or other containers…
• When using the appliance in the bathroom, unplug it after use as the presence of water near-
by may pose a danger even when the appliance is turned off.
• This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capa-
bilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of
the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play
with the appliance.
• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified per-
sons in order to avoid a hazard.
• Stop using your appliance and contact an Authorised Service Centre if:
- your appliance has fallen,
- it does not work correctly.

GB

NOT HC103 039236:039236 18/09/08 10:23 Page 5

Advertising