SoundMax SM-CMD3014 - Manual (Page 15)

15
Setting the sound characteristics
Press SEL button to enter the audio setting menu consisting of following items: Bass =>Treble =>
Balance => Fader => EQ.
Press UP/DOWN cursor buttons on the RC or VOL+/VOL- buttons on the panel to select a setting. Press
LEFT/RIGHT cursor buttons on the RC or TUN-/TUN+ buttons on the panel to adjust the setting.
Press SEL button again to confirm and return to current mode.
Note: If turning off the power all the settings of each mode will be saved. If turning off the ACC power all
the settings will reset to default values. If you don’t adjust setting within several seconds after selecting the
desired setting, the unit will automatically return to the current mode.
Setting other characteristics
In Radio or DVD mode press MENU button to enter the setting mode. In TV mode press MENU button
once to enter TV menu setting and twice to enter menu setting mode.
In the menu press UP/DOWN cursor buttons on the RC or VOL+/VOL- buttons on the panel to select a
setting page. Press ENTER button or LEFT cursor buttons on the RC or press TUN+ button or OK button
on the panel to go to the selected page.
In the selected page press UP/DOWN cursor buttons on the RC or VOL+/VOL- buttons on the panel to
select a setting. Press ENTER button on the RC or OK button on the panel to adjust the selected setting.
After you performed the adjustment, press MENU button to return to the setting page. Press MENU
button again to quit setting menu.
Following setting pages are available:
AUDIO (available in Radio, DVD and TV modes):
Bass: support 10 levels. Default level is 0.
Treble: support 10 levels. Default level is 0.
Balance: support 10 levels for each left and right channel. Default is left equal to right.
Fader: support 10 levels for each front and rear channel. Default is front equal to rear.
EQ: DSP OFF => FLAT => CLASSICS => POP => ROCK.