SoundMax SM-CMD3014 - Manual (Page 16)

16
PICTURE (available in DVD and TV modes):
Red: Adjust level of red color. Support 50 levels. Default level is 25.
Green: Adjust level of green color. Support 50 levels. Default level is 25
Blue: Adjust level of blue color. Support 50 levels. Default level is 25.
Brightness: Support 50 levels. Default level is 25
Contrast: Support 50 levels. Default level is 25.
Sharpness: Support 15 levels. Default level is 10.
Screen: Adjust screen size: 16:9 - 4:3 - FULL.
Color reset: Resume color default status. (Select YES or NO by cursor buttons, no need to press OK or
ENTER button).
DUAL (available in Radio, DVD and TV modes):
Dual: Set DUAL Zone function on/off.
Key: Use buttons at CURRENT (buttons perform operations for the current mode of the front zone) or
DVD (buttons perform DVD functions).
Vol: Adjust level of DVD volume, Support 50 levels. Default level is 15.
RDS SETUP (available in Radio, DVD and TV modes):
TA: Seek/Alarm. In TA SEEK mode, the unit will seek for traffic announcement program when TA is
pressed; in TA ALARM mode, no TA/TP is displayed and the alarm is set off.
PI: Mute/Sound. PI sound refers to the reception noise when the AF function tries to scan alternative
frequency.
RETUNE: Long/Short. RETUNE refers to the time period the unit allows for radio scan when reception is
interrupted. “S” represents a time period of 30 seconds and “L” represents a time period of 90 seconds.
MASK: DPI/ALL. During MASK DPI mode, the unit will mask only the AF which has different PI, this is
the default mode; during MASK ALL mode, the unit will mask the AF which has different PI and no RDS
signal with high field strength.
EON TA: DX/Local. If you want to receive information from local stations only, select EON TA LOC
mode. Otherwise, select EON TA DX mode.