SoundMax SM-SA6021 - Manual (Page 12)

SOUNDMAX SM-SA6021
12
FIG. 6 OPERATING ELEMENTS AND IN/OUTPUTS
1.CROSSOVER There are 3 optional modes
for the CROSSOVER: HPF, OFF, LPF.
2.HPF adjusts the high pass frequency point
from 30Hz to 5kHz.
3.LPF adjusts the low pass frequency point
from 30Hz to 250Hz.
4.BASS BOOST controls the volume of50Hz
boost from 0dB-12dB.
5.LEVEL adjusts the input gain of the unit
to accept different level of signal inputs.
6.INPUT (L) accepts the line level RCA
inputs from the left channel of a head unit
or other signal processor.
7.INPUT (R) accepts the line level RCA
inputs from the right channel of a head
unit or other signal processor.
8.OUTPUT (L) accepts the line level RCA
output from the left channel of the unit.
9.OUTPUT (R) accepts the line level RCA
output from the right channel of the unit.
10.POWER (GND) to a metal point of the car.
11.REMOTE connect the remote input terminal.
12.+B (+12V) connect the +12V power supply
of car battery. (Notes on the power supply)
13. POWER - (GREEN) illuminates green
when unit is on.
PROTECTOR - (RED) led will turn to red
when the unit runs protection mode.
14.FUSE - (1) protects the unit from damage made Fig. 6
by dangerous volume of current. (Notes on fuse specifications).
15-FUSE - (2) protects the unit from damage made by dangerous volume of current.
16.OUTPUT L (-) left speaker connections(-), when used as a bridging amplifier, bridge mode(-).
17.OUTPUT L (+) left speaker connections(+).
18.OUTPUT R (-) right speaker connections(-).
19.OUTPUT R (+) right speaker connections(+), when used as a bridging amplifier, bridge mode(+).