Installation – SoundMax SM-SA6021 User Manual
Page 5
SOUNDMAX
SM-SA6021
5
Installation
MOUNTING:
1. After reading precaution, decide where you are going to install the unit. Also, see the picture below.
2. Once the location has been determined, place the amplifier in position. Using a felt tip pen or pencil mark the four
holes to be drilled for mounting. NEVER use the amplifier as a template for drilling. It is very easy to damage the
amplifier surface in manner.
3. Remove amplifier. Drill four 3.5 mm. Diameter holes into mounting surface on steel panel. If you want mounting
the MDF or wood panel, drill four 3.0m/m diameter holes into mounting surface.
4. If possible, test the system operating before final mounting of the amplifier.
5. Mount the amplifier using the supplied 4 self-threading screws.
self-threading screws-
Fig. 1