Swarovski Optik SLC 56 - Manual (Page 9)

17
DE
16
DE EN EN
TIP: Please note your personal dioptric setting
on the dioptric scale. With it you may adjust your
individual dioptric setting anytime.
tripod connector
Remove the covering for the tripod connector
thread on the underside of the binoculars using a
small coin. To mount the binoculars on a tripod,
you will need the tripod adapter for SLC, which is
sold separately as an accessory.
assembly instructions for objective lens cover
1.
Lens-cleaning cloth
You can clean high sensitive lens surfaces with
the enclosed special cloth made of micro-fibres. It
maintenance and care
is suitable for objective lens, ocular lens and eye-
glasses.
Please keep the cloth clean, as dirt can damage
the lens surface. If the cloth gets dirty, it can be
washed in luke-warm soapy water and air-dried.
Please use it exclusively for cleaning lens surfaces!
cleaning
We have designed all elements and surfaces
to require little care.
To ensure the long-lasting optical brilliance of your
binocular, you should keep the glass surfaces free
of dirt, oil and grease.
When cleaning the lenses, first remove larger par-
ticles with an optical lens brush. For the subse-
quent thorough cleaning we recommend breathing
onto the lens surface to form a coat of condensa-
tion and then cleaning it with a soft, moist cloth.
The housing is best cleansed with a soft, moist
cloth (don’t use the lens-cleaning cloth).
In the event of hard-to-remove dirt (e.g. sand)
the eye cups can be unscrewed and cleaned very
easily.