Eizo FlexScan SX3031W - Manual (Page 6)

4
English
Prior to use Installation Troubleshooting Setting/Adjustment
Adjusting the Screen Height and Angle
Adjust the screen height, tilt and swivel the screen to the best condition for working.
Setting the Screen Display
1
Check that the monitor and the PC are powered off.
2
Press with holding down to set the display mode.
Single display: Choose <Single Display>.
Dual display: Choose <Dual Display>.
3
Press .
Attention
• Initial setting for the display mode is set to <Single Display>.
Displaying the Screen
1
Turn on the PC.
The screen image appears.
Attention
• Turn off the monitor and PC after using them. Unplugging the power cord completely shuts off power
supply to the monitor.
• When setting the display mode between single display and dual display, be sure to turn off your PC.