Plantronics HL10 - Manual (Page 6)

POR
TUGUÉS ESP
AÑOL FRANÇAIS
ENGLISH
4
pressing the talk button on your amplifier, remote unit
or headset. You should hear a dial tone in the headset
if the telephone handset is raised high enough.
3. Mount Lifter
See reference number 3 on illustration
3.1 Mounting Tape
(Underside view of lifter)
Once you have determined the best position for the lifter,
remove the mounting tape backing on the top or side
to best adhere the lifter to your telephone. On a few
telephones both the top and side mounting tapes must
be used to firmly grip the telephone.
4. Make and Receive Calls
See reference number 4 on illustration
4.1 Put on your headset and press the talk button.
4.2 This action directs the lifter to raise the telephone hand-
set from the cradle and activates the telephone line.
To make a call, use your telephone to dial the number.
When your call is completed, press the talk button again
to hang up.
When receiving a call, the ring detector senses a ring
from your telephone and transmits it to your remote unit or
headset. You can answer the call by pressing the talk button
and begin talking through your headset. When your call
is completed, press the talk button again to hang up.
Note: For remote ring detection to work you may need
to increase the telephone ringer volume. In some cases,
telephones with multi-ring tone choices may require
trying several tones to choose the most effective sound
for ring detection.