FIAT Idea - Manual (Page 233)

232
SAFETY DEVICES
CORRECT USE OF THE CAR
W
ARNING
LIGHTS AND MESSAGES
CAR
MAINTENANCE
TECHNICAL
SPECIFICA
TIONS
INDEX
DASHBOARD AND CONTROLS
IN AN
EMERGENCY
Please note:
❒ the jack cannot be repaired. If it breaks it must be replaced with a
new jack;
❒ no tool other than its cranking device may be fitted on the jack.
To change a wheel proceed as follows:
❒ Stop the car in a position that is not dangerous for oncoming traffic
where you can change the wheel safely. The ground should be flat and
adequately firm;
❒ Turn the engine off and pull up the handbrake;
❒ Engage first gear or reverse;
❒ Lift the luggage compartment panel mat;
❒ Loosen the fastener (A);
❒ Take the tool bag (B) and go to the wheel to be replaced;
❒ Take the space-saver spare wheel (C);
❒ If the car is fitted with alloy rims, remove the wheel hub with the
screwdriver provided levering in the groove (E), as shown in the
figure;
F0H0161m
F0H0162m