FIAT Idea User Manual
Page 281
Changing the windscreen wiper blades
Proceed as follows:
❒
raise the windscreen wiper arm (A) and position the blade so that it
forms an angle of 90° with the arm;
❒
press tab (B) of the coupling spring and remove the blade to be
replaced from the arm (A);
❒
fit the new blade by inserting the tab into the special slot in the arm.
Make sure it is properly locked into place.
Changing the rear window blade
Proceed as follows:
❒
raise the cover(A) and remove the arm from the car, slackening the
nut (B) that fastens it to the pivot pin;
❒
fit the new arm, positioning it correctly, and fully tighten the nut;
❒
lower the cover.
280
SAFETY DEVICES
CORRECT USE OF THE CAR
W
ARNING
LIGHTS AND MESSAGES
IN AN
EMERGENCY
TECHNICAL
SPECIFICA
TIONS
INDEX
DASHBOARD AND CONTROLS
CAR
MAINTENANCE
F0H0217m
F0H0218m