FIAT 500 - Manual (Page 143)

REPLACING FUSES
GENERAL INFORMATION
Fuses protect the electrical system: they intervene
(blow) in the event of a fault or improper action
on the system.
When a device does not work, check the condition
of its fuse: the conductor element A fig. 124 must be
intact. If it is not, replace the blown fuse with
another with the same amperage (same colour).
B fig. 124 intact fuse;
C fig. 124 fuse with damaged filament.
To replace a fuse, use the pliers D fig. 124 hooked
inside the fusebox on the left side of the instrument
panel.
Refer to the tables on the following pages to identify
the protective fuse.
WARNING
If the replaced fuse blows again, contact
a Fiat Dealership.
fig. 122 F0S0063
fig. 123 F0S0064 fig. 124 F0S0065
142
GETTING TO KNOW
YOUR CAR
SAFETY
STARTING AND
DRIVING
WARNING LIGHTS
AND MESSAGES
IN AN
EMERGENCY
SERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX