FIAT 500 - Manual (Page 57)

BONNET
OPENING
Proceed as follows:
❒ pull lever A fig. 59 in the direction indicated by the
arrow
❒ move the lever B fig. 60 to the right as shown in
the figure
❒ lift the bonnet and, at the same time, release the
supporting rod C fig. 61 from its catch D, then
insert the end of the rod into housing E in the
bonnet (larger hole) and push to safety position
(smaller hole), as shown in the figure.
WARNING
The bonnet may drop suddenly if the
supporting rod is not positioned
properly. Only perform these operations when
the car is stationary.
fig. 59 F0S0045
fig. 60 F0S0046
fig. 61 F0S0047
56
GETTING TO
KNOW YOUR CAR
SAFETY
STARTING AND
DRIVING
WARNING LIGHTS
AND MESSAGES
IN AN EMERGENCY
SERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX