FIAT Panda User Manual
Page 150
INFLATION PROCEDURE
WARNING
Put on the protective gloves provided
together with quick tyre repair kit.
Proceed as follows:
❒ Pull up the handbrake. Unscrew the tyre valve
cap, take out the flexible filler pipe A fig. 110 and
tighten the ring nut B on the tyre valve;
❒ make sure that the compressor switch A fig. 111 is
in position 0 (off ), start the engine, plug into the
power socket in the central tunnel fig. 112 and
operate the compressor turning switch A to
position I (on). Inflate the tyre to the pressure
specified in the "Inflation pressure" paragraph in
the "Technical specifications" section. Check tyre
pressure on gauge B fig. 111 with compressor
off to obtain a more precise reading;
fig. 110
F0W0176
fig. 111
F0W0181
fig. 112
F0W0178
146
GETTINGTO KNOW
YOURCAR
SAFETY
STARTING AND
DRIVING
WARNING LIGHTS
AND MESSAGES
IN AN
EMERGENCY
SERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX