FIAT Panda - Manual (Page 160)

FOG LIGHT/REAR FOG LIGHT
To change the bulb, proceed as follows:
❒ adjust the tabs A and remove the flap B fig. 123;
❒ adjust the catch C and disconnect the electrical
connector D fig. 124;
❒ turn and remove the bulb holder E;
❒ extract the bulb and replace it;
❒ refit the new lamp and carry out the procedure
described previously in reverse.
WARNING
Before replacing the bulb, wait for the
catalytic converter to cool down: RISK
OF BURNS
NUMBER PLATE LIGHTS
To replace the bulbs proceed as follows:
❒ remove lens A fig. 125;
❒ replace the bulb B fig. 126 releasing it from the
side contacts;
fig. 123 F0W0205
fig. 124 F0W0206
fig. 125 F0W0259
156
GETTINGTO KNOW
YOURCAR
SAFETY
STARTING AND
DRIVING
WARNING LIGHTS
AND MESSAGES
IN AN
EMERGENCY
SERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX