FIAT Punto 2012 - Manual (Page 190)

188
KNOWING
YOUR
VEHICLE
SAFETY
STARTING
AND DRIVING
WARNING LIGHTS
AND MESSAGES
IN AN
EMERGENCY
SERVICING
AND CARE
TECHNICAL
SPECIFICATIONS
CONTENTS
A
F0U0526m fig. 168
❒ loosen the fixing screws C and remove the headlamp;
❒ remove the bulb A-fig.168 by rotating it counter-clock-
wise and disconnect the electrical connector.
F0U0280m fig. 166
Side fig. 166
To change the bulb, proceed as follows:
❒ slide the lens A towards the front of the car to press
in the internal catch B, then pull the unit outwards;
❒ turn the bulb holder C anti-clockwise, extract bulb D
and replace it;
❒ refit the bulb holder C into the lens by turning it clock-
wise;
❒ refit the unit making sure the internal catch B clicks in-
to place.
FRONT FOG LIGHTS
(for versions/markets where provided)
To replace the bulb:
❒ loosen the screw A-fig.167 and remove the protection
template B;
C
A
C
B
C
F0U0525m fig. 167