Headlights, P.95), Multi-control lever, headlights – HONDA 2013 Ridgeline User Manual

Page 100

Advertising
background image

OFF
Parking and indicator lights
Headlights

Push down on the

multi-control lever to signal a left
turn and up to signal a right turn. To
signal a lane change, push lightly on
the lever and hold it. The lever will
return to center when you release it
or complete a turn.

To turn on the high

beams, push the multi-control lever
forward until you hear a click. The
blue high beam indicator will come
on (see page

). Pull the lever back

to return to the low beams.

To flash the high beams, pull the
lever back lightly, then release it.
The high beams will stay on as long
as you hold the lever back.

Your vehicle has heating wires at the
bottom of the windshield to help
heat the wiper blades and the
windshield. If the outside
temperature is near freezing, the
heater turns on automatically when
you turn the ignition switch to the
ON (II) position. The heater turns
off automatically when the outside
temperature is above freezing.

This function helps to increase wiper
performance when the wiper arms
sit in the parked position in snowy or
icy conditions.

1.
2.
3.

67

CONTINUED

Headlight Control Dial

Turn Signal

High Beams

Automatic Heated Wiper Zone

Multi-Control Lever, Headlights

95

12/08/09 16:11:48 31SJC670_102

2013 Ridgeline

Inst

ru

m

e

nt
s

a

nd

Cont

ro

ls

Advertising
This manual is related to the following products: