Changing a flat tire – HONDA 2013 Ridgeline User Manual
Page 367
Advertising
Attach the stay to the extension,
then attach the wheel nut wrench
to the end of the extension.
Turn the jack dial (wheel nut
wrench) clockwise as shown to
raise the vehicle until the flat tire
is off the ground.
Make sure the stay, the extension,
and the wheel nut wrench are
securely attached.
Insert the hook at the end of the
stay into the opening on the dial at
the bottom of the jack.
11.
12.
13.
Changing a Flat Tire
362
EXTENSION
DIAL
CONNECTOR BUTTON
HOOK
STAY
WHEEL NUT WRENCH
CONNECTOR BUTTON
12/08/09 16:46:48 31SJC670_369
2013 Ridgeline
T
a
k
ing
Ca
re
of
th
e
U
ne
x
p
e
c
te
d
Advertising
This manual is related to the following products: