Towing a trailer, 2010 pilot – HONDA 2010 Pilot User Manual
Page 449
Refer to the above illustrations for
wiring information.
The trailer jumper harness is used to
install the controller for the electric
trailer brakes. For more information,
see
on page
.
Insert the connector securely into
the socket.
Hook the retaining tab on the
inner side of the lid against the
retaining tab of the connector to
prevent disconnection during
operation.
Insert the trailer brake fuse into the
secondary under-hood fuse box (see
page
3.
On Touring models
On Touring models
Towing a Trailer
Trailer Jumper Harness
Trailer Connector Sockets
Trailer Brakes
Trailer Brake Fuse
D
riv
ing
445
7-PIN TRAILER SOCKET
SMALL
LIGHT
(GREEN)
LEFT
TURN/
STOP
(RED)
BACK LIGHT
(YELLOW)
GROUND
(BLACK)
BRAKE
(20A)
(BLUE)
ELECTRIC BRAKE
(BROWN/WHITE)
BRAKE LIGHTS
(SKY BLUE)
B
CHARGE
(BLUE)
RIGHT
TURN/
STOP
(WHITE)
ELECTRIC
BRAKE
(BROWN/
WHITE)
GROUND
(BLACK)
2010 Pilot