Lights – HONDA 2012 Accord Sedan User Manual
Page 366
Advertising
Turn on the lights to make sure
the new bulb is working.
Push the trunk lid trim back into
position.
Put the fastener into the hole on
the side of the trunk lining.
Reinstall the screw.
Open the trunk, and remove the
socket from the light assembly by
turning it one-quarter turn counter-
clockwise.
Pull the bulb straight out of its
socket. Push the new bulb straight
into the socket until it bottoms.
Reinstall the socket. Turn it
clockwise until it locks. Make sure
the new bulb is working.
2.
1.
3.
6.
7.
8.
Lights
Replacing a High-mount
363
BULB
SOCKET
11/07/09 22:05:39 31TA5640_368
Ma
int
e
na
nce
Brake Light Bulb
2012 Accord Sedan
Advertising
This manual is related to the following products: