HONDA 2012 Accord Sedan - Manual (Page 391)

Put on the spare tire. Put the
wheel nuts back on finger-tight,
then tighten them in a crisscross
pattern with the wheel nut wrench
until the wheel is firmly against
the hub. Do not try to tighten the
wheel nuts fully.
Lower the vehicle to the ground,
and remove the jack.
Tighten the wheel nuts securely in
the same crisscross pattern. Have
the wheel nut torque checked at
the nearest automotive service
facility.
Tighten the wheel nuts to:
Remove the center cap (if
equipped) before storing the flat
tire in the trunk well. 15.
12.
13.
14.
Changing a Flat Tire
388
CENTER CAP
80 lbf·ft (108 N·m , 11 kgf·m)
11/07/09 22:09:30 31TA5640_393
T
a
k
ing
Ca
re
of
th
e
U
ne
x
p
e
c
te
d
2012 Accord Sedan