Sony SLV-SE230G - Manual (Page 15)

15 Setting up the remote commander
Getting Star
ted
Code numbers of controllable TVs
If more than one code number is listed, try entering them one at a time until
you find the one that works with your TV.
To switch to wide mode, see the footnotes below this table for the applicable
code numbers.
* 1 Press (wide) to switch the wide picture mode on or off.
* 2 Press (wide), then press 2 +/– to select the wide picture mode you want.
* 3 Press (wide). The menu appears on the TV screen. Then, press M/m/</, to
select the wide picture you want and press OK.
Tip
• When you set your TV’s code number correctly while the TV is turned on, the TV
turns off automatically.
Notes
• If you enter a new code number, the code number previously entered will be
erased.
• If the TV uses a different remote control system from the one programmed to work
with the VCR, you cannot control your TV with the remote commander.
• When you replace the batteries of the remote commander, the code number may
change. Set the appropriate code number every time you replace the batteries.
Manufacturer Code number
Sony 01* 1 , 02
Akai 68
Ferguson 52
Grundig 10* 1 , 11* 1
Hitachi 24
JVC 33
Loewe 45
Mivar 09, 70
NEC 66
Nokia 15, 16, 69* 3
Panasonic 17* 1 , 49
Philips 06* 1 , 07* 1 , 08* 1
Saba 12, 13
Samsung 22, 23
Sanyo 25
Sharp 29
Telefunken 36
Thomson 43* 2
Toshiba 38
Manufacturer Code number