Sony SLV-SE230G - Manual (Page 64)

59 Searching using the index function (not available on SLV-SE230G/I)
Ad
ditional Ope
rations
Searching using the index function
(not available on SLV-SE230G/I)
The VCR automatically marks the tape with an index signal at the point where each
recording begins. Use these signals as references to find a specific recording.
To find a specific recording by scanning (Index scan)
To search a specific recording (Index search)
To stop searching
Press x (stop).
1 Insert an indexed tape into the VCR.
2 Press ./> (index search). The
VCR starts scanning each recording for
five seconds in the corresponding
direction.
3 Press H (play) to start playback when you find the desired point.
1 Insert an indexed tape into the VCR.
2 Press ./> (index search) twice.
• To search ahead, press > (index
search) twice.
• To search backwards, press . (index
search) twice.
3 Press ./> (index search) depending on the direction where your
desired programme is located.
Each time you press the button, the number increases or decreases up to
±20, respectively.
4 The VCR starts searching, and playback starts automatically from that
point.
INDEX SCAN B B :
INDEX SEARCH : B B + 0 2
continued