HONDA 2008 Pilot - Manual (Page 142)

Error Message
Error Message
Cause
Cause
Solution
Solution
The chart on the right explains the
error messages you may see in the
display while playing a disc.
If you see an error message in the
display while playing a disc, press
the eject button. After ejecting the
disc, check it for damage or
deformation. If there is no damage,
insert the disc again.
The audio system will try to play the
disc. If there is still a problem, the
error message will reappear. Press
the eject button, and pull out the disc.
Insert a different disc. If the new
disc plays, there is a problem with
the first disc. If the error message
cycle repeats and you cannot clear it,
take your vehicle to a dealer.
FOCUS Error
Mechanical Error,
or a DVD has
been loaded in the
CD player
High Temperature
FOCUS Error
Mechanical Error,
or a DVD has
been loaded in the
CD player
High Temperature
Press the EJECT button and pull out the CD. Check if
it is inserted correctly in the CD player.
Make sure the CD is not scratched or damaged. For
more information, see page 136 .
Press the EJECT button and pull out the CD. Check
the CD for damage or deformation. For more
information, see page 136 . If the CD cannot be pulled
out, or the error message does not disappear after the
CD is ejected, see your dealer.
Will disappear when the temperature returns to
normal.
Press the EJECT button and pull out the CD. Check if
it is inserted correctly in the CD player.
Make sure the CD is not scratched or damaged. For
more information, see page 136 .
Press the EJECT button and pull out the CD. Check
the CD for damage or deformation. For more
information, see page 136 . If the CD cannot be pulled
out, or the error message does not disappear after the
CD is ejected, see your dealer.
Will disappear when the temperature returns to
normal.
LX models
Except for LX models
Disc Player Error Messages
138
2008 Pilot
Table Of Contents Main Menu