Disc changer error messages, 2008 pilot – HONDA 2008 Pilot User Manual

Page 143

Advertising
background image

Error Message

Cause

Solution

FOCUS Error

No CD in the CD

magazine

Mechanical Error

High Temperature

No CD magazine in the

CD changer.

Press the magazine EJECT button and pull it

out. Check for an error message, and insert the

magazine again. If the message does not

disappear or the magazine cannot be pulled out,

see your dealer.

Insert a CD.

Press the magazine EJECT button and pull it

out. Check for an error message and insert the

magazine again. If the message does not

disappear or the magazine cannot be pulled out,

see your dealer.

This message should disappear when the

temperature returns to normal.

Insert the CD magazine.

The chart on the right explains the
error messages you may see in the
display while playing a disc.

If you see an error message in the
display while playing a disc, press
the eject button. After ejecting the
disc, check it for damage or
deformation. If there is no damage,
insert the disc again.

The audio system will try to play the
disc. If there is still a problem, the
error message will reappear. Press
the eject button, and pull out the disc.

Insert a different disc. If the new
disc plays, there is a problem with
the first disc. If the error message
cycle repeats and you cannot clear it,
take your vehicle to a dealer.

Optional on LX models

Disc Changer Error Messages

Fe
a

tu

re

s

139

2008 Pilot

Table Of Contents

Main Menu

Advertising
This manual is related to the following products: