HONDA 2012 Civic Coupe User Manual
Page 68
67
uu
Indicators
u
Continued
Instrument Panel
Indicator
Name
On/Blinking
Explanation
Message
*
Malfunction
Indicator Lamp
●
Comes on when you turn the
ignition switch to ON
(
w
, and goes
off either when the engine starts or
after several seconds if the engine
is not started. If "readiness codes"
have not been set, it blinks five
times before it goes off.
●
Comes on if there is a problem
with the emissions control system.
●
Blinks when a misfire in the
engine's cylinders is detected.
●
Readiness codes are part of the on board
diagnostics for the emissions control
systems.
2 Testing of Readiness Codes P. 325
●
Comes on while driving - Have the
vehicle checked by a dealer.
●
Blinks while driving - Stop in a safe
place where there are no flammable
objects. Stop the engine for 10 minutes
or more, and wait for it to cool down.
Then, take the vehicle to a dealer.
2 If the Malfunction Indicator Lamp
Charging System
Indicator
●
Comes on when you turn the
ignition switch to ON
(
w
, and goes
off when the engine starts.
●
Comes on when the battery is not
charging.
●
Comes on while driving - Turn off the
heating and cooling
*
system and rear
defogger in order to reduce electricity
consumption.
2 If the Charging System Indicator
Shift Lever
Position
Indicator
*
●
Indicates in which position your
shift lever is.
—
Indicator
*
Not available on all models
CIVIC 2D-31TS8600.book 67 ページ ２０１１年３月７日 月曜日 午後１時１０分
Home
QRG
Index
TOC
2012 Civic Coupe