Turn signal, headlights – HONDA 2009 Odyssey User Manual

Page 139

Advertising
background image

Push down on the

lever to signal a left turn and up to
signal a right turn. To signal a lane
change, push lightly on the lever,
and hold it. The lever will return to
center when you release it or
complete a turn.

The rotating switch

on the left lever controls the lights.
Turning this switch to the ‘‘

’’

position turns on the parking lights,
taillights, instrument panel lights,
side-marker lights, and rear license
plate lights.

Turning the switch to the ‘‘

’’

position turns on the headlights.

If you leave the lights on with the
key removed from the ignition
switch, you will hear a reminder
chime when you open the driver’s
door.

When the light switch is in the
‘‘

’’ or ‘‘

’’ position, the

lights on indicator comes on as a
reminder. This indicator stays on if
you leave the light switch on and
turn the ignition switch to the
ACCESSORY (I) or the LOCK (0)
position.

To switch from low

beams to high beams, push the left
lever forward until you hear a click.
The high beam indicator will come
on (see page

). Pull it back to

return to low beams. To flash the
high beams, pull the lever back
lightly, then release it. The high
beams will stay on as long as you
hold the lever back.

73

Turn Signal

Headlights

High Beams

Turn Signal, Headlights

136

2009 Odyssey

Table Of Contents

Main Menu

Advertising